White angled discharge nozzle for AR100 skimmer - Gre (52226)

White angled discharge nozzle for AR100 skimmer - Gre (52226)

Name: White angled discharge nozzle for AR100 skimmer - Gre (52226)
Brand: GRE
SKU: JB-52226
Price: 30.99 EUR
Availability: InStock

GRE

€30.99

Tax included

Delivery from €4.15 to a pickup point · to your home from €7.16
Rates and delivery times

Genuine Gré angled discharge nozzle for the AR100 skimmer

This white discharge nozzle is the genuine Gré part, reference 52226.
It replaces the nozzle supplied with the AR100 skimmer for Gré above-ground pools.

The nozzle returns the filtered water from the filter back into the pool.
Its adjustable grille allows you to direct the jet to ensure good water circulation.

The rear elbow connects directly to the filter hose, without the need for any additional parts.
A protective cover fits over the elbow on the outside of the pool.

Its white colour matches the skimmer and liner of most Gré pools.
Replacement takes just a few minutes and requires no special tools.

Ideal for replacing a broken, cracked or discoloured nozzle, or a part lost whilst dismantling the pool.

1 item available in our warehouse

Reference JB-52226

Your legal guarantee rights

Customer service
Via our contact form

Home or pickup-point delivery
Dispatched the same day, Monday to Friday, for all orders placed before 10 a.m.

Secure payment
Credit card, PayPal, SSL-protected site

Description

An original part for your Gré above-ground pool

The return nozzle forms part of the filtration system.
The water drawn in by the skimmer passes through the filter, then returns to the pool via the nozzle.

What’s included

The white return nozzle with its adjustable grille.
The connecting elbow for the filter hose.
The protective cover for the elbow.

Compatibility

Gré manufacturer’s reference: 52226.
Part designed for the Gré AR100 skimmer with nozzle, fitted to many Gré above-ground swimming pools.
Please check your skimmer’s part number before ordering.

Installation

Replace the old nozzle

Switch off the filter pump.
Lower the water level below the nozzle, or block the water inlet.
Remove the old nozzle and clean the wall around the hole.
Fit the new nozzle with its seals, then tighten gently.
Connect the hose to the elbow and tighten the clamp.
Refit the protective cap onto the elbow.

ℹ️ Good to know: the jet must always be positioned opposite the skimmer.
This ensures the water circulates around the pool and debris is carried towards the skimmer.

⭐ Tip from the team: angle the grille slightly downwards.
This allows the water at the bottom to mix more effectively and ensures the treatment is distributed throughout the pool.