Master your water circuits with our high-strength pressure PVC elbows!
Designing a watering or irrigation network often requires precise changes of direction without weakening the structure of the circuit. At Jardiboutique, we offer a range of pressure PVC elbows specially designed to withstand the stresses of pressurised flow (pumps, pressurised water networks). Unlike standard drainage fittings, our pressure PVC elbows ensure optimal flow continuity while resisting water hammer and temperature variations. Whether you need to work around an obstacle in your henhouse or set up a complex irrigation system in your garden, our fittings guarantee unbeatable strength.
Discover our models available in various angles (commonly 45° or 90°) and diameters to perfectly fit your PN10 or PN16 pipes. Whether you choose solvent-weld models for a fixed, permanent installation or threaded models for more flexibility, each fitting is manufactured with a smooth inner wall to limit pressure loss. With Jardiboutique, build reliable, durable and perfectly watertight networks.
Jardiboutique's technical advice: The smoothness of your network depends on your fittings. Flow tip: To limit pressure loss and turbulence, favour two 45° elbows over a single 90° elbow when space allows; this makes it easier for water to flow through. Installation: When gluing, mark reference points with a felt-tip pen on the pipe and elbow before applying the pressure PVC glue, as once fitted together the bond is almost instant and no longer allows angle adjustment. Winter protection: If your circuit is exposed to frost, make sure the elbows are fully drained, as they are often the weak points where stagnant water can burst the fitting when it freezes.
