90° compression tee, male threaded

Create your branch lines and connect your fittings with our 90° threaded compression tees!

The 90° threaded compression tee is a strategic fitting for expanding your hydraulic networks. It allows you to split a PE pipe line into two directions while offering, on its central section, a male threaded outlet. This configuration is ideal for installing a tapping point, a sectioning valve, or a sprinkler directly on a main line. At Jardiboutique, we have selected high-performance threaded tees, designed to provide maximum pressure resistance and flawless sealing.

Discover our high-density polypropylene models, resistant to UV rays and chemical stress. Thanks to the mechanical compression system on both side outlets, you connect your PE pipes effortlessly, while the standardised central thread lets you screw on any plumbing fitting. This dual functionality (compression + threading) optimises the modularity of your water installations.

The Jardiboutique technical tip: The central branch is often a stress point. Assembly tip: For the male threaded section, always use PTFE tape or hemp to ensure a perfect seal with the female fitting you are screwing on. Installation: When inserting the PE pipes into the compression outlets, make sure to push the pipe fully in to the internal stop, past the O-ring. Maintenance: If you fit a valve onto the thread, make sure the tee is well stabilised (or fixed) so that opening/closing operations do not rotate the fitting on the pipe.