15-litre large skimmer for concrete and liner swimming pools - Astralpool
A 15-litre wide-mouth skimmer to collect surface debris
The Astralpool 34413 skimmer draws surface water from the pool and feeds it into the filtration system.
Its enlarged inlet (wide opening) captures more leaves, insects and floating debris.
The debris remains in the basket, which is emptied by opening the square lid.
It is made from UV-resistant ABS.
A floating flap and a valve are used to adjust the suction.
It is supplied with adhesive seals, a flange and screws for installation.
Recommended flow rate: 5 m³/h. Astralpool recommends one skimmer per 25 m² of water surface area.
Bottom suction connection (screw-in): 1"1/2 internal, 2" external.
Simultaneous connection to the bottom drain: Ø 50 mm internal.
Top overflow: Ø 40 mm.
2-year warranty.
Description
Astralpool 15 L skimmer with large opening, square cover
A built-in fitting for liner pools, installed in the pool wall at water level.
It collects floating debris before it sinks to the bottom of the pool.
Features
- Manufacturer’s reference: 34413 (white)
- Capacity: 15 litres
- Wide opening (large slot)
- Square lid
- Waste collection basket
- Floating flap and flow control valve
- Material: UV-stabilised ABS
- Standards: EN 16582-1 and EN 16713-2
Connections
- Bottom suction (screw-in): 1½" female, 2" male
- Simultaneous connection to the bottom drain: internal Ø 50 mm
- Top overflow: Ø 40 mm
- Recommended flow rate: 5 m³/h
Contents of delivery
- Skimmer with cover and basket
- Adhesive seals
- Flange
- Screws
Maintenance
Empty the basket regularly, especially in autumn.
A full basket reduces suction and puts strain on the pump.
ℹ️ Good to know: allow one skimmer for every 25 m² of water surface area.
If the area is larger, fit a second one to ensure effective surface suction.
2-year warranty.
⭐ Tip from the team: position the skimmer facing the prevailing winds.
The wind will then blow leaves and debris towards its inlet.