WELTICO skimmer extension, 60851

Levelling the skimmer

After installing a new lining, tiling or a thicker coping, the skimmer frame may end up too low in relation to the finished surface. This Weltico riser fills the gap and brings the skimmer cover back up to the correct level, without having to remove the entire unit.

A gain of 38 mm

The riser adds 38 mm of usable height (out of a total height of 50 mm). This is enough to compensate for the extra thickness added by most pool coping materials.

Compatible with Weltico skimmers (except the A300)

It fits Weltico skimmers, with the exception of the A300 model. Please check your skimmer model before ordering.

Features

Our installation tips

Insert the riser between the skimmer body and the frame/cover, ensuring it sits flat to maintain the watertight seal. Check that the cover is flush with the finished surface once the riser is in place.

❓ Frequently asked questions

What is this riser used for?

To raise the skimmer frame by 38 mm to bring it back to level after adding a surface finish, tiling or coping.

Which skimmers is it compatible with?

With Weltico skimmers, except for the A300 model.

How much extra height does it provide?

It adds 38 mm (total height 50 mm).

What are its dimensions?

Large outer diameter 213 mm, small outer diameter 207 mm, height 50 mm.