87°30' PVC drainage elbow, ø 32 mm, female-female, for gluing – FITT

A reliable drain elbow for your plumbing work

The 87°30' elbow is the most commonly used fitting for turning a drain at a right angle. Its slightly open angle, rather than a sharp 90°, maintains the pipe’s gradient and facilitates water flow.

Diameter 32 mm

It connects to PVC drain pipework with an external diameter of 32 mm. This diameter is commonly used for small drains, such as those from a washbasin or a hand-wash basin.

Double female socket for gluing

Both sides of the elbow are female: the pipe fits inside each socket. No additional sleeve is required; the connection is made directly between the pipe and the elbow.

Injection-moulded PVC-U

PVC-U (unplasticised polyvinyl chloride) is the most widely used thermoplastic for non-pressurised drainage systems. The fittings are injection-moulded and the main components have been awarded AFNOR NF certification for drainage applications.

Applications

• Wastewater drainage.
• Rainwater drainage.
• Ventilation in buildings.
• Overhead or buried installation.

Installation

Preparation

Cut the pipe at a right angle, deburr it, then clean the outside of the pipe and the inside of the socket with a PVC cleaner.

Bonding

Apply PVC adhesive to the pipe and inside the socket, push the pipe all the way into the socket without twisting it, then hold it in place for a few seconds. Allow the adhesive to set for the time specified on the packaging before running water through it.

Specifications

• Brand: FITT
• Manufacturer’s reference: SRBCOF87032
• Type: 87°30' drain elbow
• Diameter: 32 mm
• Connection: female-female, glue-fit
• Material: PVC-U
• Colour: grey
• Sold individually