White Easyline bottom drain flange with 2 seals and 8 screws - Astralpool
The complete mounting bracket for Easyline bottom drains
This Astralpool clamp attaches to the body of a bottom drain from the Easyline range.
It clamps the liner between the two gaskets supplied, ensuring a watertight seal.
It comes as a complete set: white clamp, 2 seals and 8 Parker screws (5.5 x 25 mm).
Outer diameter: 230 mm. Inner diameter: 170 mm. Centre-to-centre distance between fixing holes: 190 mm.
Distance between two adjacent holes: 72 mm.
Before ordering, measure your current flange: outer diameter and distance between two opposite screw holes.
If the dimensions match, the new flange can be fitted in place of the old one.
To be replaced when changing the liner, or if the old flange is cracked or warped.
Description
Flange with seals and screws for Easyline bottom drain, white
Astralpool spare part for the Easyline range bottom drain.
It secures the liner to the bottom drain.
Specifications
- Manufacturer’s reference: 4402021103
- Range: Easyline
- Colour: white
- Outer diameter: 230 mm
- Inner diameter: 170 mm
- Centre-to-centre distance between fixing holes: 190 mm
- Distance between two adjacent holes: 72 mm
Contents of delivery
- 1 white flange
- 2 gaskets
- 8 Parker screws 5.5 x 25 mm
Assembly
Place a seal on each side of the liner, against the body of the bottom drain.
Place the flange on top, aligning it with the fixing holes.
Tighten the screws gradually, in a cross-pattern, without applying excessive force.
ℹ️ Good to know: the gaskets are compressed when tightened and cannot be reused.
Always use new gaskets, such as those supplied with this flange.
⭐ Tip from the team: when replacing the liner, replace the flange and the gaskets on each sealing component at the same time.
This will prevent you from having to drain the pool again due to a leak.