Easyline flat bottom drain grille, sand colour, Ø 174 mm, with screws - Astralpool
A replacement sand grille for the Easyline bottom drain
This flat Astralpool grille replaces the grille on a bottom drain from the Easyline range.
It is secured to the drain body using the two M5 x 25 metric screws supplied.
Its sand colour matches a sand-coloured liner.
Outer diameter: 174 mm. Centre-to-centre distance between screw holes: 156 mm.
Before ordering, measure your current grille: its outer diameter and the distance between its two screw holes.
If both measurements match, the new grate can be fitted in place of the old one.
A cracked or broken grille should be replaced immediately: it protects the bottom drain inlet.
Supplied with 2 screws: nothing else is required for fitting.
Description
Easyline flat bottom drain grille, sand colour
Astralpool spare part for the Easyline range of bottom drains.
It comes with its fixing screws.
Specifications
- Manufacturer’s reference: 4402020014
- Range: Easyline
- Flat grille
- Colour: sand
- Outer diameter: 174 mm
- Centre-to-centre distance between screw holes: 156 mm
- Fixing: 2 M5 x 25 metric screws
Contents of the pack
- 1 bottom drain grille
- 2 M5 x 25 screws
Installation
Switch off the filtration system before working on the drain.
Unscrew the old grille and position the new one over the fixing holes.
Tighten the 2 screws without applying excessive force.
ℹ️ Good to know: this grille is also available in grey from Astralpool (item number 4402020018).
Check the colour of your other parts to be sealed before making your choice.
⭐ Tip from the team: make the most of changing the grille to clean the inlet of the bottom drain.
Leaves and debris that build up there reduce suction.