POOL LINER Felt Glue - Aerosol 500 ml

SPECIAL PROFESSIONAL AEROSOL GLUE FOR SWIMMING POOLS.

Gluing :

Rubber, mineral fiber and foam insulation, paper, glass cloth, or cotton, cork, carpet, polyester felt, plastics (test beforehand), etc..., on themselves or on metal supports (except copper and zinc), wood, concrete, high density extruded polystyrene, glass, etc. ....

Application:

In case one of the surfaces is porous: Apply Pool Liner glue on one side, wait 30 seconds and press firmly the two parts to be glued.

In case both surfaces are waterproof: Apply Pool Liner glue on both sides, wait 1 minute and then firmly press both parts to be glued.

Important:

Shake the can well before use. Apply at a distance of about 30 cm from the substrate to be bonded.

In the case of a polystyrene support, increase the spraying distance and keep the aerosol constantly moving.

Advantages :

Economical due to its foaming formulation - Low storage volume - Easy to use - Adjustable nozzle 3 positions - Adheres to all surfaces, No more material to clean.

Technical properties :

Contains no dichloromethane, no CFC, no HCFC

Composition : Styrene butadiene rubber (SBR) in solution.

Application temperature : +5°c to +30°c.

Working temperature : -10°c to +40°c.

Color Yellow/gold. Dry extract 25 % by weight. Packaging Aerosol. Storage

in a dark, clean and dry place between +5°c and +25°c.

Shelf life 36 months in its packaging.

Keep out of reach of children.

Keep away from heat / sparks / open flames / hot surfaces. Do not smoke. Wear protective gloves / protective clothing / eye / face protection.

Avoid breathing dust / fumes / gases / mists / vapors / aerosols.

Do not eat, drink or smoke while handling this product.